Features and Benefits
- Ultra-compact, efficient lightweight design
- Durable construction for reliability
- Abrasion resistance (low-friction surface)
- Easy to service: externally serviceable main air valve
- Chemical resistance
- Flexible mounting and porting options
- Horizontal, vertical and end suction
Applications
* ldeally suited for intermittent/on-demand, portable moderately abrasive fluids, and suspended solids.
* Simple air distribution system design, minimal moving parts.
* Clamped design for lightweight and quick maintenance.
* AODD pumps can pass even large, shear-sensitive solids without degradation or heat buildup transferred to pumped medium
* AODD pumps are able to run dry without damage to the pump
* Lead time: Normal Stock
| Liquid Inlet/Outlet Size |
Wetted Part Material |
Diaphragm Material |
| 1/4" |
Aluminum alloy |
PTFE |
| 1/2" |
Cast iron |
Neoprene |
| 3/4" |
Stainless Steel 316 |
Santoprene |
| 1" |
PVDF |
Buna-N |
| 1 1/2" |
PP |
Viton |
| 2" |
|
EPDM |
| 3" |
|
|
Pay attention: Performance data is based on pump testing with water at room temperature. Factors such as different diaphragm materials, ball and seat materials, feeding methods, environment, fluid characteristics, hydraulic conditions, etc., may lead to deviations of more than 5%.
Safety Information
Ambient temperature range: -20°C to +40°C Process temperature range: -20°C to +80°C for models rated as category 1 equipment -20°C to +100°C for models rated as category 2 equipment In addition, the ambient temperature range and the process temperature range do not exceed the operating temperature range of the applied non-metallic parts as listed in the manuals of the pumps.
Installation And Start-Up
Locate the pump as close to the product being pumped as possible. Keep the suction line length and number of ffttings to a minimum. Do not reduce the suction line diameter.
Air Supply
Connect the pump air inlet to an air supply with sufffcient capacity and pressure to achieve desired performance. A pressure regulating valve should be installed to insure air supply pressure does not exceed recommended limits.
Air Valve Lubrication
The air distribution system is designed to operate WITHOUT lubrication. This is the standard mode of operation. If lubrication is desired, install an air line lubricator set to deliver one drop of SAE 10 non-detergent oil for every 20 SCFM (9.4 liters/sec.) of air the pump consumes. Consult the Performance Curve to determine air consumption.
Air Line Moisture
Water in the compressed air supply may cause icing or freezing of the exhaust air, causing the pump to cycle erratically or stop operating. Water in the air supply can be reduced by using a point-of-use air dryer.
Air Inlet And Priming
To start the pump, slightly open the air shut-off valve. After the pump primes, the air valve can be opened to increase air ffow as desired. If opening the valve increases cycling rate, but does not increase the rate of ffow, cavitation has occurred. The valve should be closed slightly to obtain the most efffcient air ffow to pump ffow ratio.
ccurred. The valve should be closed slightly to obtain the most efffcient air ffow to pump ffow ratio.
Total Spare Parts
Pump Replacements, Pump parts
Diaphragm
Valve Ball
Pilot Valve Assembly
Liquid Level Controller
Manual Ball Valve
Air Valve
Muffler
Pulsation Damper
......
We can provide you specific products with different max flow, max pressure, suction lift and so on.
"DJ pump" is a high-tech company specializing in R & D, production and sales of AODD pumps and parts,
Since 2011, Our products have been widely sold and accepted in North America, South America, Europe, and Southeast Asia.
air-operated diaphragm pump, including metal and non-metal series, widely applied in chemical, paints & coatings, food processing, pharmaceutical, construction, mining, utilities, pulp & paper, metal finishing
"DJ pump" supplies original quality Replacement Parts that fit DJ pump®, serfico®, Aro®, Blagdon®, Depa®, Flux®, G raco®, Sandpiper®, Tapflo®, Verderair®, Versa-Matic®, and Yamada® Air Operated Double Diaphragm Pumps.
Full range of parts:
diaphragms, seats, balls, pistons, gaskets, air valves, O-rings, hardware, clamp bands, shafts, mufflers, and repair kits.
"DJ pump" is committed to supplying convenient delivery and one-step solutions in the chemical pump industry.
More Pictures About Our Factory
Audited Supplier 
){kind=link}