Magnetic Driven Centrifugal Chemical Pump

• Customization: Available
• Max.Head: 30-50m
• Max.Capacity: >400 L/min
• Model NO.: Underarm Walking Sticks
• Driving Type: Magnetic
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump
• Trademark: DJ pump
• Origin: China
• HS Code: 7604210000
• Production Capacity: 50000 Units/Year

Product Description

Product standard
API610 / GB3215-1982

Patent product
ZL0126252702, 20042007841303
 


Product introduction 
KXG type centrifugal pump with small flow and high head, KXG-X type non-clogging self-priming pump for rubber powder and KLJB type slurry pump are the new products developed by our company in view of the situation of the booming development of the domestic rubber industry, the introduction of the relevant advanced technology from Japan, and the combination of the actual condition of the pumps used by our company in the rubber industry (Patent No.: ZL0126252702, 20042007841303). 


Product feature

Features of KXG pump
1, pump structure science. Pump flow (Q) minimum amount of only 0.2mh, the total head (H) up to 120m, which is other centrifugal pumps can not reach the performance. (Flow s0.2m'/h, while the head ≥ 85m, the pump body and other parts are equipped with water cooling devices, etc.).
2, according to the working conditions of the media temperature and corrosion, toxicity and other specific circumstances to determine the pump selection. Such as: medium temperature ≥ 200C can be used to support the center of the KXG pump, using API610 standard cooling, flushing program.
3, with stable performance, safety, environmental protection and other advantages.
4,The pump has low maintenance rate, and it is easy to disassemble and install when it needs repair or maintenance.
5,The design and manufacture of this series of pumps are in accordance with AP1610 standard and GB3215-1982 standard.

  

Features of KLJB pump.
1,Rubber industry production process conveying "slurry clear", but also general centrifugal pumps are difficult to handle. Only KLJB type slurry pump is a special pump for transporting slurry in rubber production. The series of pumps using the rear open structure, disassembly cleaning, maintenance, as long as the back of the pump cover is removed, the pump rotor and so on all out, cleaning, maintenance and convenience; while the pump cavity volume is large, and open impeller, not easy to be slurry clear bonding. Even if sometimes need to remove part of the bonded material, but also more convenient, will not be like other centrifugal pumps that are frequently disassembled and laborious.
2,Pump running smoothly, safety, environmental protection, high efficiency, energy saving.
3,The design and manufacture of pumps are in accordance with API610 standard.

 

Application range
petroleum, chemical, light industry, metallurgy, pharmaceutical, papermaking, electric power, environmental protection and other industries, conveying low or high temperature media, neutral or corrosive liquids.

Pumping medium
Inorganic and organic acids such as sulfuric, nitric, hydrochloric and phosphoric acids at various temperatures and concentrations.
Alkaline solutions such as sodium hydroxide and sodium carbonate at various temperatures and concentrations.
Various salt solutions
Various liquid petrochemical products, organic compounds, and other corrosive media.
Rubber industry's production of sewage (containing rubber powder, particles) and other industry's sewage rubber industry's "slurry clear" or other media of similar nature.

KXG    0.2   --  80                                    KXG-X      100 --  80  --  160  B                                       KLJB    125 -- 315



Performance parameters of the table

 

Overview

The CRP-M pump range is equipped with a permanent magnetic drive in accordance with DIN EN ISO 2858, striking new paths especially for its design of the journal bearings, optimized internal flows and pressures, its high efficiency magnetic drive system and axial thrust balancing.

The hydraulics of this pump range is designed to achieve high efficiencies and low NPSHr values. The CRP-M range of magnetic drive pumps consists of 35 hydraulics to meet almost all customer's requirements and is built with the latest engineering techniques and tools such as: 3D Modeling, Finite Element Analysis and CFD-Simulation, in order to assure our customers of the best product quality.

CHARACTERISTICS

• Horizontal, single stage
• Radially split
• End-Top nozzle arrangement
• Single suction impeller
• Foot mounted
• Axial thrust balance

DESIGN FEATURES

• Spherical Journal Bearing Design (patented)
• Optimized and balanced internal flows and pressures
• High efficiency magnetic drive system
• Axial thrust balancing
• 100% leakage free containment shell, self-vented and fully drainable

BENEFITS

• Environmentally friendly - Zero fugitive emissions to the atmosphere
• Directly interchangeable with other dimensional standard pumps
• Maximum bearing life given that there are no bearing alignment problems
• Cost savings through optimum efficiency

 

 

 

 

Metallic Magnetic Coupled Pumps

DJ Pumps diverse range of Sealless Magnetic Coupled Pumps includes a product series manufactured from 316 stainless steel. The pump technology is unique given no seals are used to give the closed solution pump containment. The pump is operated by a synchronisation of magnetic forces. The drive magnet is connected to an electric motor which rotates and using the magnetic forces connects with the pump impeller magnet positioned inside the pump.

Our stainless steel series of pumps are ideal for use in the aerospace and automotive industries. The maximum operating temperature of the pumps is 160°C, which is ideal for processes such as potassium permanganate and ardrox cleaners. Stainless steel material provides a safe earth route when transferring potentially flammable solutions, and as such our range is suitable for ATEX zoned areas
 

 

 

 

TYPE			Inlet Size	Outlet Size	Max flow(LPM)	Max head(M)	Power(kw)
PP	PVDF	PPS
DJ0.5PPE	DJ0.5KV	DJ0.5PPS	3/4"	3/4"	50	5	0.065
DJ1PPE	DJ1KV	DJ1PPS	1''	1''	90	7	0.15
DJ2PPE	DJ2KV	DJ2PPS	1''	1''	120	9	0.37
DJ2HPPE	DJ2HKV	DJ2HPPS	1"	1"	160	15	0.55
DJ3PPE	DJ3KV	DJ3PPS	1-1/2"	1-1/2"	240	15	0.75
DJ3HPPE	DJ3HKV	DJ3HPPS	1-1/2"	1-1/2"	300	17	0.75
DJ4PPE	DJ4KV	DJ4PPS	1-1/2"	1-1/2"	350	17	1.1
DJ5PPE	DJ5KV	DJ5PPS	2"	1-1/2"	400	23	1.5
DJ6PPE	DJ6KV	DJ6PPS	2"	1-1/2"	500	26	2.2
DJ7PPE	DJ7KV	DJ7PPS	2- 1/2"	2"	800	31	3.75
DJ8PPE	DJ8KV	DJ8PPS	2- 1/2"	2"	980	35	5.5
DJ9PPE	DJ9KV	DJ9PPS	2- 1/2"	2"	1000	38	7.5