Hy15/20-PP 1/2" Pneumatic PTFE Diaphragm Pump for Strong Acide and Alkali Pneumatic Double Diaphragm Air Operated Reciprocating

• Customization: Available
• After-sales Service: Yes
• Rated Current: No
• Voltage: No
• Material: PP, PVDF
• Power: Pneumatic
• Valve Body Type: Ball Valve
• Function: Pneumatic
• Diaphragm Material: Neoprene, Santoprene, PTFE, FKM, Buna, Hytrel etc.
• Performance: High Flow
• Max. Pressure: 7 Bar Max.
• OEM: Yes
• Cust.: Yes
• Compatible with: Sandpiper, Wilden Aro
• Transport Package: Carton and Pallet
• Origin: Prc
• HS Code: 8413
• Production Capacity: 2600

Product Description

Air Operated (Pneumatic)Diaphragm Pump

Product name	Air Operated (Pneumatic)Diaphragm Pump
Pump Size	06=1/4 inch, 10=3/8 inch, 15=1/2 inch, 20=3/4 inch 25=1 inch, 40=1.5 inch, 50=2 inch, 80=3 inch
Center block	AL=Aluminum, PP=PP, SS=SS304
Pump body	PP=PP, KV=PVDF, PM=POM, AL=Aluminum SS=SS304, LL=SS316, AC=Cast iron
Diaphragm	ST=Santoprene, HY=Hytrel, VT=Viton BN=Buna-N, EP=EPDM, GE=Geolast
Warranty	12 months

Performance Introduction
Diaphragm pump can not only pump liquids and powders, but also some mediums that usually hard to flow. It prossesses the advantages self-priming pump, submerged pump, shielding pump, slurry pump, impurity pump and other transportation machines.
1.No need to pilot water, suction lift up to 7m, pump head up to 80m, outlet pressure≥0.8MPa.

2.Spacious flowing way with good through-pass performance, the largest size of particles allowed can be up to         9.4mm. While pumping slurry and impurity, the abrasion is very low.

3.The pump head and capacity can be adjusted via the pressure of air source(between 0.1-0.84MPa).

4.Temperature range of working environment: 5 to 65ºC
.
5.The pump has no rotating parts and shaft seals. The diaphragms separate the pumped medium from moving part and working medium absolutely, so that the pumped medium does not leak to outside. So there are no risks of environment pollution and personal injury while pumping poisonous, volatile or corrosive media.

6.It works without electricity and is safe and reliabe in inflammable and explosive conditions.

7.Can be immerged into the medium.

8.Easy to use and works reliably. To turn on/off the pump, just open and close the air valve. Even in cases of unexpected long-term operation without medium or sudden shutdown, it will not be damaged. Once overloaded, it has self-protecting function and will shut down automatically. As long as the load goes back to normal, it starts up automatically again.

9.Simple structure, less vulnerable parts. The pump has a simple structure design not contact with moving parts such as air-distributing valve and link rod, so the performance will not go worse with the abrasion of rotors, pistons, gears and vanes as other types of pumps.

10.Can pump the viscous liquids(viscosity below 10000 centipoise).

11.Without lubrication. There are no effects to the pump in dry operation mode. This is key feature of the pump.


 

Pump List

 

Packaging & Shipping

After Sales Service

We supply all original quality spares and kits for these pumps.

Company Profile

"DJ pump" is a high-tech company specializing in R & D, production and sales of AODD pumps and parts,
Since 2011,Our products have been widely sold and accepted in North America, South America, Europe, Southeast Asia.

air operated diaphragm pump,including metal and non-metal series, widely applied in chemical, paints & coatings, food processing, pharmaceutical, construction, mining, utilities, pulp & paper, metal finishing

"DJ pump" supplies high quality Replacement Parts that fit famous pump brands.

Full range of parts:
diaphragms, seats, balls, pistons, gaskets, air valves, O-rings, hardware, clamp-bands, shafts, mufflers and repair kits.

"DJ pump" is committed to supply convenient delivery and one-step solutions in chemical pump industry.

DJ pump does not supply pumps and parts with original brands.